Can't Install Vista 5536 on Asus P5B Deluxe Wifi Board

I'm unable to get Vista to install on this motherboard, this is the newest
latest and greatest Core 2 Intel P965 Chipset motherboard and it has a
JMicron JMB363 PATA/SATA Controller that handles the PATA connector used by
the cdrom drives.
If I boot from the Vista media (5536/5472/5384) it detects the ICH8R
controller handling the hard drives but it gives an error stating it doesn't
have adequate CDROM/DVD drivers and that I must load drivers. I created the
latest 7/20/06 JMicron JMB363 XP driver diskette and give it those drivers
but it does not help.
I've tried setting the controller to IDE, RAID, and AHCI

The funny thing is I have Vista 5472 running on this same box and it works
flawlessly with the NEC DVD_RW ND2510A and Plextor PW-W4824A drives on the
JMICRON JMB363 controller in IDE mode which uses the 'Standard Dual Channel
PCI IDE Controller' driver in Windows Vista! I can burn DVDs and play music
CDs and all. Its only the SETUP PROCSS that fails. I had installed the OS
before the switchover to the new motherboard and thus the issue is coming up
now when I am trying to do a new install of 5536 Vista on this machine.

Anyone have any ideas?

Asus P5B Deluxe Wifi
Intel ICH8R Controller for SATA Hard Drives
JMICRON JMB363 PATA/SATA controller for CDROM/DVD drives
Intel E6600 2.4ghz Core 2 Processor
2 Gigs of OCZ PC-6400 DDR2 Memory
NEC ND-2510A DVDRW
Plextor PX-W4824A CDRW

It seems on this motherboard the Vista Setup doesn't want to mount the DVDRW
drive (NEC ND-2510A).
On an older 865 chipset Soyo motherboard it had no problem detecting and
installing using this same drive on firmware 2.17. I have updated the drive
to the latest 2.18 firmware and its still not listed as a cdrom under BROWSE
once the JMicron drivers are loaded. I also tried a Promise Ultra 100
controller, same thing, it mounts and displays the Plextor CDRW but not the
NEC ND-2510A v2.18.

"Brian Lewis" Brian wrote in message
...
I'm unable to get Vista to install on this motherboard, this is the newest
latest and greatest Core 2 Intel P965 Chipset motherboard and it has a
JMicron JMB363 PATA/SATA Controller that handles the PATA connector used
by
the cdrom drives.
If I boot from the Vista media (5536/5472/5384) it detects the ICH8R
controller handling the hard drives but it gives an error stating it
doesn't
have adequate CDROM/DVD drivers and that I must load drivers. I created
the
latest 7/20/06 JMicron JMB363 XP driver diskette and give it those drivers
but it does not help.
I've tried setting the controller to IDE, RAID, and AHCI

The funny thing is I have Vista 5472 running on this same box and it works
flawlessly with the NEC DVD_RW ND2510A and Plextor PW-W4824A drives on the
JMICRON JMB363 controller in IDE mode which uses the 'Standard Dual
Channel
PCI IDE Controller' driver in Windows Vista! I can burn DVDs and play
music
CDs and all. Its only the SETUP PROCSS that fails. I had installed the
OS
before the switchover to the new motherboard and thus the issue is coming
up
now when I am trying to do a new install of 5536 Vista on this machine.

Anyone have any ideas?

Asus P5B Deluxe Wifi
Intel ICH8R Controller for SATA Hard Drives
JMICRON JMB363 PATA/SATA controller for CDROM/DVD drives
Intel E6600 2.4ghz Core 2 Processor
2 Gigs of OCZ PC-6400 DDR2 Memory
NEC ND-2510A DVDRW
Plextor PX-W4824A CDRW

Copy the Vista-DVD to a folder and run hte setup from there. That how I have
done all my installs.


"Brian Lewis" Brian wrote in message
...
I'm unable to get Vista to install on this motherboard, this is the newest
latest and greatest Core 2 Intel P965 Chipset motherboard and it has a
JMicron JMB363 PATA/SATA Controller that handles the PATA connector used
by
the cdrom drives.
If I boot from the Vista media (5536/5472/5384) it detects the ICH8R
controller handling the hard drives but it gives an error stating it
doesn't
have adequate CDROM/DVD drivers and that I must load drivers. I created
the
latest 7/20/06 JMicron JMB363 XP driver diskette and give it those drivers
but it does not help.
I've tried setting the controller to IDE, RAID, and AHCI

The funny thing is I have Vista 5472 running on this same box and it works
flawlessly with the NEC DVD_RW ND2510A and Plextor PW-W4824A drives on the
JMICRON JMB363 controller in IDE mode which uses the 'Standard Dual
Channel
PCI IDE Controller' driver in Windows Vista! I can burn DVDs and play
music
CDs and all. Its only the SETUP PROCSS that fails. I had installed the
OS
before the switchover to the new motherboard and thus the issue is coming
up
now when I am trying to do a new install of 5536 Vista on this machine.

Anyone have any ideas?

Asus P5B Deluxe Wifi
Intel ICH8R Controller for SATA Hard Drives
JMICRON JMB363 PATA/SATA controller for CDROM/DVD drives
Intel E6600 2.4ghz Core 2 Processor
2 Gigs of OCZ PC-6400 DDR2 Memory
NEC ND-2510A DVDRW
Plextor PX-W4824A CDRW

Well, I should have said copy the DVD when booted in another OS like XP (if
you are dual booting). Then doulble click the setup.exe that what copy while
in XP.


"Thymej" wrote in message
...
Copy the Vista-DVD to a folder and run hte setup from there. That how I
have done all my installs.


"Brian Lewis" Brian wrote in message
...
I'm unable to get Vista to install on this motherboard, this is the
newest
latest and greatest Core 2 Intel P965 Chipset motherboard and it has a
JMicron JMB363 PATA/SATA Controller that handles the PATA connector used
by
the cdrom drives.
If I boot from the Vista media (5536/5472/5384) it detects the ICH8R
controller handling the hard drives but it gives an error stating it
doesn't
have adequate CDROM/DVD drivers and that I must load drivers. I created
the
latest 7/20/06 JMicron JMB363 XP driver diskette and give it those
drivers
but it does not help.
I've tried setting the controller to IDE, RAID, and AHCI

The funny thing is I have Vista 5472 running on this same box and it
works
flawlessly with the NEC DVD_RW ND2510A and Plextor PW-W4824A drives on
the
JMICRON JMB363 controller in IDE mode which uses the 'Standard Dual
Channel
PCI IDE Controller' driver in Windows Vista! I can burn DVDs and play
music
CDs and all. Its only the SETUP PROCSS that fails. I had installed the
OS
before the switchover to the new motherboard and thus the issue is coming
up
now when I am trying to do a new install of 5536 Vista on this machine.

Anyone have any ideas?

Asus P5B Deluxe Wifi
Intel ICH8R Controller for SATA Hard Drives
JMICRON JMB363 PATA/SATA controller for CDROM/DVD drives
Intel E6600 2.4ghz Core 2 Processor
2 Gigs of OCZ PC-6400 DDR2 Memory
NEC ND-2510A DVDRW
Plextor PX-W4824A CDRW