|
|
Sleep mode - used to work perfectly by
sand
I have a Vista Ultimate SP1 machine that used to go to sleep and wake up
flawlessly. I could enter sleep manually or automatically. However, I
recently installed a couple of applications and now the machine will not
enter sleep automatically but it does work if manually performed. The apps
were an HP monitor software suite, VLC (which didnt run under my vista and
was removed) and AlSee. ...
|
July 14th 08 09:26 PM
by Brink
|
1 |
130 |
|
|
DVD for 64 bit vista? (do any even exist? by
idiotprogrammer
Hi, I just learned that my DVD writer is having compatibility problems
with 64 Vista SP 1.
What it can do:
play music CDs
install programs
What it can't do:
rip mp3s from music
burn DVDs.
|
|
3 |
140 |
|
|
bluetooth headset audio not as reliable under Vista SP1 by
Karl the Pagan
I use a Jabra BT125 both for my phone and for day-to-day audio so that I can
listen to internet radio programs and youtube etc without disturbing my
office mates.
Under my fist Vista install this worked great on my Sager NP9262 (BT is
Cambridge Silicon Radio / Microsoft driver) much better than my previous
Dell. Specifically it reconnected when I turn my headset on/off and did not
require...
|
|
1 |
154 |
|
|
Registry Editor by
cardrey
How many of you think that we should have to go through the registry editor
process every time we need to use our CD/DVD drives? I'm having to do it
every 2 or 3 days. I dream of the days when I was using XP and autorun would
actually work on my computer and I could actually burn and read CD's without
jumping through all these hoops.
I am a very dissatisfied with my new computer, and I...
|
|
5 |
135 |
|
|
Can't remove DVD burner without Vista having Startup problems -- H by
Stephen
Can't remove DVD burner without Vista having Startup problems -- Help!
1. I decided to remove the Plextor 755SA DVD burner.
2. I uninstalled the drive.
3. I shut down the computer|OS.
4. I removed the SATA connector from the motherboard, and the same (along
with SATA power connector) from the drive.
5. Upon reboot, the computer experienced Startup problems, and I had to run
the Windows repair...
|
|
1 |
153 |
|
|
Cricut by
maryNSC
Does anybody have any ideas how to get my cricut to work on the 64 bit..
Provo craft I dont think they know how to fix it..
When i turn on my cricut my computer will beep but it will not
recognize it.
I have VISTA 64 bit
HP s3430f
--
maryNSC
|
|
4 |
214 |
|
|
no audio passthru from mic to speakers by
mce_builder
Hi,
I've an Asus motherboard HTPC (vista home premium SP1) with SPDIF to an
amp/speaker unit. Things are fine audiowise. Now, I'm trying to add a
microphone, but can't seem to get sound thru speakers. I don't have a
soundcard, and onboard drivers are codenames Azalia according to the asus
manual.
After spending hours, i've discovered:
- i can adjust the level in mic and boost in Levels...
|
|
0 |
149 |
|
|
|
|
18 |
325 |
|
|
ISDN TA - anyone know of one that works with Vista by
Jarryd
Does anyone know of a ISDN modem that works with Vista? I have bought a USB
ZyXEL that works great on XP but when installing it on Vista the PC crashed,
blue screened and fell on its face. I tried to install again on a Vista
laptop in case it was a hardware incompatibility issue but the same thing
happened.
Please don't tell me that you simply cannot get an ISDN TA that will run on...
|
July 15th 08 09:12 AM
by Jarryd
|
4 |
141 |
|
|
Linksys 2200 extender connection issues by
kevin macdonald
Hi there, I am having great difficulty connecting my extnder to the network.
I have tried wirelessly, as well as wired. Linksys has tried several things
over the past week....and they have been great....but to no avail. I have a
vista ultimate 32 bit, a wrt310n router and the appropriate adapter. I am not
convinced that my P.C. is configured properly, and after reading something
about an...
|
|
1 |
133 |
|
|
Projector Not Recognized by
MichaelFaulkner
Have problems with Dell laptops recognizing external projector (Dell
projector as well). Irratic and difficult to duplicate symptoms. Patched up
systems. Have tried different startup sequences. Have eight of these with
similar issues. Ghost cloned using BCDEDIT sequence.
|
July 15th 08 12:50 PM
by PvdG42
|
1 |
152 |
|
|
Is it possible to view my camcorder output on my laptop by
jeeji
Hi
I have just purchased a Canon HG10 HD camcorder, and would like to
view its live ouput directly on my laptop which is a Compaq 8510p
(HP).
My canon has HDMI support and so does my laptop. Is it possible to
connect the two through HDMI? I think my HDMI on the laptop is only
for output, but is that a hardware limitation or software?
|
|
1 |
156 |
|
|
Vista CPU Change by
Talking Cures
Hello
I want to try a new CPU an my PC and then if it is not suitable change back
to original, is this OK in Vista or does it contravene the Activation state.
Peter
|
July 15th 08 06:49 PM
by Brink
|
6 |
200 |
|
|
Cannot install printers by
daybase
I have a new Dell Inspiron laptop on which I have installed a full range
of software applications. Once installed I then used Acronis True Home
Image to back up disk, partititons, operating system the lot! Only then
did I discover that I for some reason I cannot install any printers -
all attempts to do so fail whether local, network, drivers from CD,
drivers downloaded, automatically or...
|
|
1 |
176 |
|
|
ATI remote wonder working on VISTA by
exe
Hi!
Unfortunately, that way did not worked for me. My ATI Remote Controler
still, does not work. *Is there any other way to fix this
problem?:sarc:* I use google in hope to get some useful information, but
I had no luck:confused:
--
exe
|
July 15th 08 09:17 PM
by exe
|
0 |
164 |
|
|
4GB Ram Installed / Total Physical Ram = 2.75GB? by
Impulse
OS Name Microsoft® Windows Vista™ Ultimate
Version 6.0.6001 Service Pack 1 Build 6001
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Manufacturer NVIDIA
System Model NFORCE 780i SLI
System Type x64-based PC
Processor Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz, 2500 Mhz,
4 Core(s), 4...
|
|
4 |
190 |
|
|
Logitech mouse won't wake up system from sleep by
Eddie G
I have Vista Home Premium and just bought a Logitech mx3200 keyboard
and laser mouse. My previous MS cordless desktop would wake my system
from sleep mode by wiggling the mouse. Now with Logitech it does NOT
wake up from the mouse. I also moved the MS desktop to another PC
with Windows XP, and now that one will NOT wake from sleep by wiggling
the mouse.
Any suggestions?
Thanks!
|
|
0 |
163 |
|
|
ATI remote wonder working on VISTA by
exe
Oh...I guess I'm blind or something. I managed it. For me it works,
without installing x10 drivers. I just didn't realize, that Windows
Defender is blocking the software at startup :)
--
exe
|
July 15th 08 11:10 PM
by exe
|
0 |
143 |
|
|
Enable AHCI non-boot drive by
Brian Hoyt
I have an ASUS P5B Deluxe with LSI SAS controller. My boot drive is on the
SAS controller and then I have an additional drive on the Intel SATA
controller. I originally built machine with IDE mode enabled for controller
and want to switch to AHCI for it. I figured it wouldn't be a problem since
it isn't even my boot drive. I enabled the AHCI driver by following the
instructions in the...
|
|
4 |
135 |
|
|
IDE to USB by
Ehab[_2_]
I just bought an IDE to USB cable to connect a couple of old Seagate
internal hard drives to my new laptop w/ Vista on and get the files I
had off them. The drives show up fine and the software is installed
right away as soon as I plug them in, but when I try to access them from
My Computer it says I have to format the drives first. I know that that
would delete everything off the hard drive,...
|
July 16th 08 12:15 AM
by DL
|
2 |
175 |