|
|
SigmaTel High Definition Audio Codec by
David
Hello! Possible bug follows:
I just recently installed RC1 and it was pretty smooth--except for the
sound. While it runs mostly out of the box and I can not record anything
using my microphone. At first it used some generic driver (Microsoft High
Defintion Audio.. something like that) and after fiddling with it I think I
was able to get it to use the updated driver from Windows Update to...
|
September 8th 06 05:00 PM
by David
|
0 |
478 |
|
|
Charging Issues by
David
The Battery in my model dv9000 computer is dead. It is plugged into AC power
and the computer works fine. The battery icon shows AC power is connected
but, the lightning bolt isn't showing indicating that the battery is not
charging.
|
|
9 |
143 |
|
|
Changing the microprocessor by
David
So If I want to change my micro to a new faster dual-core version, will I
have to re-load Windows (Vista), etc. or can I just swop the old micro out
for the new one and boot up as normal? (The old one is also a dual-core).
Both Intel types.
Thanks in advance.
|
October 5th 07 05:25 AM
by David
|
8 |
190 |
|
|
Vista Ultimate 64 doesnt show correct RAM by
David
Hello, I have Windows Vista Ultimate 64bit edition, CPU E6550 (4gbRAM 4*1gb
Kensington ddr677), p35-ICH9 motherboard (checked, most recent bios) ATI
2600pro catalyist 7.10 (working, but small secondary output problem) 320Gb
SATA2 harddisk.
It is a brand new computer, XP pro was on before, then I realised i could go
64bit, ( all hell broke loose) installed Vista 64 Ultimate.
The point is...
|
November 13th 07 10:00 AM
by David
|
9 |
186 |
|
|
Realtek onboard sound and Visat 64 by
David
Hi my motherboard is a P35+ICH9, latest bios and the latest Audio
drivers/codecs and the 5.1 doesnt work, i can get audio but only one channel
and one input the microphone, beyond this nothing.
Any ideas whats the problem.
Thanks.
|
|
3 |
168 |
|
|
Secondary display problems vista 64 by
David
Hi, my ATI 2600pro works with the secondary display, however Vista only
recognises the secondary as a generic non pnp monitor, I cant seem to update
the driver beyond this, its a problem because the ATi drivers only allow a
refresh rate of 25i on this screen, which is rubbish, looks like the hardware
isn't even being used.
It's a HD display and will support up to 1080i at up to 100hz, which...
|
December 11th 07 12:49 PM
by David
|
0 |
103 |
|
|
no printer driver for hp laserjet 4l by
david
I cannot run my HP Laserjet 4L printer on windows Vista - the HP website says
use the add printer wizard - but that doesn't work. can anyone help?
thanks.
|
|
4 |
134 |
|
|
blue csreen by
david
i get a blue screen when i boot up...the error is #3 and says that my panda
process protection service isnt started..when i try and start it the device
is missing and i cant find it
|
|
1 |
114 |
|
|
blue screen by
david
my computer notifies me of error 3 which is panda process protection service.
this service isnt starting. when i try to start it it is missing a device. i
cant find or download this device. this is the cause of my blue sceen
|
|
1 |
135 |
|
|
Core 2 CPU Upgrade: Pentium 4 to Core 2 by
David
I have an ABIT IP-95 MB with 2GB of DDR2 667 MHz memory with an Intel
Pentium 4 2.66GHz 1 MB Cache CPU. I am thinking of buying a core 2 Intel
chip for an upgrade.
I can get a Intel E6600 (2.4GHZ and 4MB cache) for about $225
The 6320 at 1.8GHz and 4MB cache is $175.
In between these two there is the E6420 (2.13GHz and 4MB cache) at $215.
|
June 10th 07 07:30 PM
by freddy
|
5 |
187 |
|
|
S I Raid 3114 Controller update by
David
For those who might be interested, (many of you), my Vista automatic
'updates' informed me today of an update to Silicon Image's 3114 RAID
Controller, which I loaded and so far so good.
|
March 17th 07 10:36 PM
by David
|
0 |
131 |
|
|
SigmaTel High Definition Audio Codec by
David
Hello! Possible bug follows:
I just recently installed RC1 and it was pretty smooth--except for the
sound. While it runs mostly out of the box and I can not record anything
using my microphone. At first it used some generic driver (Microsoft High
Defintion Audio.. something like that) and after fiddling with it I think I
was able to get it to use the updated driver from Windows Update to...
|
|
2 |
341 |
|
|
Sidewinder Dual Strike Game Controller by
David
I have installed the software for the controller. The software sees the Dual
Strike but when I goto select properties to configure the controller I am
greeted with the following message:
There was an internal error....
The system then closes the Rundll32 file.
I have to say that its very disappointing that Microsoft's own product does
not work correctly on its state of the art OS.
|
February 7th 07 01:02 AM
by David
|
0 |
200 |
|
|
Disk Management "Connecting to Virtual Disk Service" by
David
I'm in the Computer Management console trying to start the Disk Management
snap-in so I can format a new hard drive. Computer Management Storage
Disk Management.
All I get is "Connecting to Virtual Disk Service ... " in the status line.
Under Services, the Virtual Disk Service is Started (Automatic) and the
services it's dependent on are also started.
I can see the new disk in Device...
|
March 12th 08 02:21 PM
by bas75
|
2 |
241 |
|
|
Vista and LPC Interface Controller by
David
My newly installed Vista Business Edition shows an "Unknown Device" as the
"Intel(R) 82801EB LPC Interface Controller" in the "Device Properties"
section of 'Device Manager'. Anybody know what this is and do I need it? I
presume it is hardware on the motherboard. The p.c. works okay, (except for
Media Player 11). Vista cannot find a driver for this device. Thanks. Bye.
|
February 11th 07 01:18 AM
by David
|
0 |
254 |
|
|
Drivers For Dell 2005 FPW ????? by
David
Hi All,
Just have a query in regards to setting up my 20" Dell Flat
Panel monitor.
I have been unable to find drivers anywhere for Windlws Vista 32 Bit for
this product
and was wondering if anyone may be able to shed some light on this Problem
for me.
Monitor works fine with Vista but the reason Im looking for drivers is
because the
USB ports on monitor are not working, all cables...
|
|
7 |
148 |
|
|
RAID and defrag does not work by
David
I have recently ugraded XP to Vista Business. I have a RAID-1 with Silicon
Raid drivers. The computer works fine as it used to but I find that the Vista
defrag command in the C-drive properties box does not work, i.e. nothing
happens. I was wondering if defrag does not work because the 2 HDD drives are
set up as RAID-1, or if Vista has a problem? Has anyone done a defragment on
their hard...
|
March 17th 07 10:32 PM
by David
|
5 |
168 |
|
|
Vista reports HDD failure. by
David
Recenlty installed Vista Business. Have a RAID-1 configuration. Ever since
Vista installed, I keep getting random alerts on startup about one of my
HDD's imminent failure and to do a system backup 'now'. I have been ignoring
this, (but I have done a backup!). Anyway, I am not sure which HDD is
supposed to be failing. I think it is rubbish because they are only about 6
months old. Any ideas?...
|
|
5 |
147 |
|
|
DVD drive not present by
David
I installed windows vista home premium 64 bit on my ferarri 4000 model 4005
which has 2 gig of ram now anyways the cd/dvd burner on it no longer is
showing up or auto detecting cds being put into my dvd drive why dose this
happen and how do I fix it I have the upgrade version and upgraded from
windows xp pro I just want a working drive that shows up like with xp
|
|
1 |
174 |
|
|
Computer thinks hardware is connected by
David
I have no hardware connected to my laptop (no printers, flash drives, iPods,
etc.), but the computer keeps making the "safely remove hardware" beep every
few minutes. The icon to do this quickly appears on the bottom taskbar for a
second. I was able to catch it and open it, but it shows no hardware. How
can I stop the comoputer from thinking something is attached?
( 1 2)
|
|
13 |
250 |