|
|
Asus A8N32-SLI Deluxe Not Recognized by
pjb
ketzazu, I have not heard anything bad personally about Yukon. Indeed I
actually use that LAN socket for my daily use. Here is a link to the
download page for Yukon Windows Vista x86 (yk60x86_v9.16.2.3.zip)
Released 29th January. I manually updated the driver to this, and it
works fine for me. Hope it helps you.
http://www.marvell.com/drivers/driverDisplay.do?dId=101&pId=39
--
pjb
|
February 19th 07 05:22 AM
by BSchnur
|
7 |
187 |
|
|
Intel Matrix Storage Manager RAID controller by
Ol' Jedi
I set up my bios to enable the RAID, then ctrl-I upon boot and created a
RAID. The onscreen display during boot says the raid is operating normally.
When Vista tries to install, it shows me the raid disk on the list (478 GB
(2x250 HDD)). When I select it, vista says "unable to find a disk that
meets the criteria for installation." No explanation.
When I disassemble the RAID--Vista...
|
February 19th 07 06:03 AM
by --roy--
|
2 |
167 |
|
|
|
|
5 |
147 |
|
|
Nvidia FX Go5200 drivers? by
Leythos
I've managed to find a hack to get the latest (actually any) GO5200
drivers working in vista so that my laptop can use something other than
Standard VGA, but, I have to believe that others have the same issue.
Anyone got a fully functional Nvidia FX Go5200 driver link that doesn't
require it to be hacked?
--
- remove 999 to reply to me.
Using Gravity on Vista for your...
|
|
4 |
176 |
|
|
Vista Rejected, XP lost DVDRW drives by
PWF
First of all the upgrade advisor found no issues with my dvd drives, just an
nforce network device.
I also created a restore point, prior to upgrade and installed all xp
critical updates prior.
After allowing the Vista Ultimate run, I came back to my chair and XP was
back running, told me that it has rolled back to XP because it was unable to
find any DVD drive. Contact to purchase...
|
February 19th 07 11:41 AM
by whiwo
|
7 |
147 |
|
|
Dual Monitors but screen flickers or blurbs by
newby
I have an asuslaptop A7 series with an add'l monitor Iiyama Prolite. My
rpoblem is that the attached monitor flickers and now it appears that the
laptop monitor flickers or sreed waves now & again. i have tried to install
the driver for the attached monitor but XP does not seem to accept it. I
have a ATI Mobility Radeon graphics card with an ATI Catalyst software but i
just can't seem to...
|
February 19th 07 12:50 PM
by newby
|
0 |
148 |
|
|
Aero function by
Huib
Hi forum,
To use the Aero-functie i am reading that special hardware is required.
I cannot find what this hardware is: a separte chip or is a 256 / 512
video-Ram already ok?
Thanks
Huib
|
February 19th 07 12:57 PM
by JW
|
3 |
156 |
|
|
Gyration by
John
anyone having problems with Gyration products, I have the GC1005M mouse and
keyboard, originally all of these products and some new ones were sold as
Vista ready, I am having an inf driver error for these, any thoughts.
|
|
4 |
166 |
|
|
Drivers for Samsung Camcorder by
JH
Anyone who knows where to get a functional driver for DV Camcorder Samsung VP
D964W . I've used the old one for Win XP and it doesn't work.
--
JH
|
|
3 |
230 |
|
|
Foxconn C51XEM2AA-8EKRS2H NVIDIA Socket AM2 by
Martin Racette
Hi
I would like to know if anyone has any major problem using that motherboard
with Vista 64bit, and in particular with an 8800GTS video card
The reason I'm asking is that I'm thinking of changing my curent motherboard
(Asus A8N-SLI Deluxe) for that one, if I can get it to work with that video
card
|
|
4 |
163 |
|
|
Installing a legacy UPS by
Andy
How do I install a legacy UPS which connects through COM1 In XP this was
found under screensaver/power ...
There is nothing like this in VISTA.
Where is it hidden?
Thanks
Andy
|
|
6 |
184 |
|
|
Program error by
ZainDustin
Hello everybody, I have been trying to use an Unpacker program to unpack some
files in a game. But the problem is every time I try to use an MS-DOS Batch
File to Unpack all the files in a specific folder. Anyway, every time I try
to run the program, I'm told that another program is using it. So, I
restarted the PC and still the same error comes up. I read the Readme.txt
and it said that...
|
|
0 |
164 |
|
|
Solution Dual Monitor Problems – flicker at startup by
Clayton
Just wanted to pass on a solution to a problem I was having
Problem: I have a desktop with dual monitors. A Gateway FPD2185 LCD as
primary and SynMaster 730B as secondary (extended). A Radeon 9800pro is the
video card. After installing Vista the main monitor would blink on and off
while at the logon screen. After logging ( moving the mouse and typing
in-between monitor flashes) the monitor...
|
February 19th 07 04:00 PM
by Clayton
|
0 |
168 |
|
|
Voice Mail Recommendations, please by
BillP
I have been using CallSoft Pro for years as my voice mail application, but
it is no longer supported. I am looking for a voice modem/software solution
for one line that supports multiple mail boxes and distinctive ringing as
well as fax.
TIA
BillP
|
February 19th 07 04:09 PM
by BillP
|
0 |
199 |
|
|
DVD/CD Burner Driver Issues by
whiwo
I installed Vista without a hitch. Yeah, there a couple of minor issues that
I can deal with until new drivers come out...with the exception of one thing.
Vista no longer recognizes my Plextor DVD Burner nor my Backup Sony CDR
Burner. Nothing wrong with them, the BIOS has no problems and the Device
Manager list them properly. I've tried uninstalling the drivers and reboot
but Vista...
|
|
8 |
191 |
|
|
How to burn the whole image to a DVDR on Vista? by
[email protected]
I have an ISO-9660 image file (about 3GB, exact representation of the
original installation media, including the content and the logical
format). Does Vista have a capability to write it to a blank DVD-R
resulting in an identical copy of the original DVD including file
name
and volume label information? The default Burn utility in Vista
just writes this file as a file and not as an image of the...
|
February 19th 07 05:26 PM
by bulb005
|
5 |
225 |
|
|
|
|
1 |
190 |
|
|
Unable to access mouse setting in control panel. by
edearl
Hello.
I am trying to access my mouse settings in control panel as the
administrator, however, it will not let me. The button i ncontrol panel does
not respond at all. Every other button does, though, like network settings,
personalization, etc. Can anyone tell me what is wrong?
I am running a laptop with Windows Vista Home Basic.
Thanks.
|
February 19th 07 05:35 PM
by edearl
|
0 |
165 |
|
|
Microsoft wireless notebook mouse by
Morten
When i try to install this hardware it can not find any drivers even after i
downloaded intelipoint 6.1 for vista with the driver.
My other question is that i have problems with my nivida geforce go 7400
graphics card. i have to use beta drivers. when i download the latest driver
is says that it is not compability with my current hardware or my current
software/driver.
--
hilsen
Morten
|
February 19th 07 07:14 PM
by Morten
|
0 |
201 |
|
|
|
|
7 |
152 |