|
|
Linksys WDT11 (PCI PCMCIA adapter) by
DDS
On my desktop, I have a been using a PCI to PCMCIA adapter with a 54Mbps
PCMCIA card on a XP for a while, works fine.
I tried installing the same driver under RC2 and it will not work, any idea
?
Best regards,
DS
|
October 30th 06 11:02 AM
by DDS
|
0 |
166 |
|
|
Why is USB 2.0 so slow now ? by
DDS
I have an external hard drive I use for backups.
Is is a USB 2.0 device and it's been working great to date, with XP SP2
speed has been OK.
But since I have installed VISTA RC2, it is incredibly slow.... like it's a
USB 1.1 device, like the 2.0 drivers have not loaded properly or something.
Under XP when connected to a USB 1.1 device or hub, a message pops up
alerting that it would run...
|
October 30th 06 07:38 PM
by DDS
|
0 |
133 |
|
|
Trouble with Pioneeer 111D by
deaden_07[_3_]
I found out that my external DVD drive with firmware 1.29 was the cause
of my Vista Ultimate 64 bit lockups and sudden power offs. So I removed
it from the enclosure and put it on the IDE channel on the motherboard.
Now if I put a disc in the drive Windows pauses all activity except for
already open windows and programs. I can call task manager, but until I
eject the disc it doesn't appear. ...
|
August 10th 07 03:30 AM
by Jane C
|
4 |
162 |
|
|
Epson Perfection V500 Photo and scanning negatives by
deaden_07[_8_]
The default software that comes with the Epson scanner is great for
everything but the negatives I want to scan. The sizes they let you
select for the negatives don't match the negatives I am working with.
So instead of seeing 8 separate pictures it sees 6.
I downloaded Vuescan from 'VueScan Scanning Software'
(http://www.hamrick.com) and it at least lets you scan the whole
negatives strip. I...
|
|
2 |
126 |
|
|
Xbox wireless controller for PC not showing up in Halo CE menu by
Deadlywill
Hi all -
I cannot seem to get the wireless 360 pad for PC to show up in Halo PC. I
have updated the drivers. Also the controller light is flashing constantly -
does that mean anything as i've not used one before. I was sure you would be
able to use this thing for Halo ?
|
|
1 |
142 |
|
|
DXDIAG and WMI gone? by
deadpixel
So DXDIAG shows no information about my computer except for the basics but no
BIOs, processor chipset or w/e Its not their.
Next my windows management instrumation software is gone. I followed these
steps
http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=1615707&SiteID=17
yet nothing is wrong.
|
|
0 |
149 |
|
|
Windows Vista/Media Player 11 wont recognize cd/dvd writer by
deadringer
hi i was trying to burn a cd a while ago and then i realized that media
player11 wont recognize my cd burner, so i cant burn anything.
i looked around and saw that if i right click on my cd drive and click on
properties, it should have a recording tab that can "enable burning" , but i
dont have that.
i am using a samsung sh-s182d cd/dvd writer and it wasnt listed as a
compatible device...
|
|
8 |
114 |
|
|
Vista 64bit and ASUS A8V sound drivers by
deafbus
I also have the ASUS A8V Delux board. Vista Beta 2 64 installed on a seprate
harddrive. xpp 64 on the other. Beta 2 gets along fine on this machine, when
I insatlled Vista RC 1 did all the trouble start as in this post. I tried to
install ASUS's 64 updates for the sound and the network but nothing worked.
the fix: Format and reinstall Beta 2 again and all is fine now. Take care, Al.
"Quasar"...
|
November 30th 06 06:36 PM
by deafbus
|
0 |
163 |
|
|
sound help with vista by
deafwithvista
i did clean instal of vista to down-grade my computer's performance. i got
most of the bugs fixed, but i still have no sound. when i go to device
manager it says that the device cannot start, error code 10. also, the little
speaker thingy in the toolbar says "no output device installed". can anyone
help me here? please? don't make me beg, because there's nothing worse than a
fat man begging
|
|
4 |
162 |
|
|
Vista wont recognize my USB device by
Dean
For some reason when i plug in my USB dance pad vista tells me it can't
recognize it and it shows up in the device manager as unknown device. This
device does not come with drivers and does not need any it works fine when i
plug it into a pc running Windows xp but it wont work on my Vista computer
also i plugged in other usb devices in the same port and they work fine so i
know it's not the...
( 1 2)
|
December 26th 07 07:38 PM
by Dean
|
11 |
232 |
|
|
Microphone Troubleshooting by
Dean
I have a Philips SBCHM200 microphone connected to my Realtek HD Audio (ALC
880) via the front pink jack.
The microphone is partially working as it clearly plays through the speakers
of the PC.
It appears on the list of Recording Devices on the Sound dialog and is
selected as the default device but when tested it plays through speakers but
the recording bars show no activity.
|
|
5 |
115 |
|
|
very slow ide DVD read in vista x64 by
Dean Malencik
::I installed vista x64 ultimate RC1 on a Gigabyte E45-UD3R motherboard
with 8 megs of RAM. Everything seems to be working fine except for the
DVD read/write drive. Incidentally the hard drives are SATA but the
DVDROM is an ide device. If I put in a blank disk and then burn some
files to it everything is fine and responsive. However if I put this
same disk in at a later time and try to view...
|
|
2 |
211 |
|
|
Realtek High Definition Audio Driver Re-Release by
dean-dean
It appears that Realtek made an OOPS yesterday (July 24), with the Version
R1.72 package for their High Definition Audio Driver. I installed the
driver twice, noticing the driver wasn't actually updating their previous
R1.71 package. The driver version remained unchanged after the update
(Version 6.0.1.5443, dated 7/10/2007), and was not reflecting the version
noted in their README (Version...
|
|
1 |
104 |
|
|
|
|
5 |
199 |
|
|
Released: ATI Catalyst Beta Driver for Vista RTM by
Dean-Dean
This driver (32bit/64bit) will also work under Windows Vista RC2.
https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&folderID=5712
Product series supported:
Radeon® 9500, 9600, 9700, 9800, X300, X550, X600, X700, X800, X850 series
Radeon® X1300, X1600, X1650, X1800, X1900, X1950 series
All-in-Wonder® 2006, 9600, 9800, X600, X800, X1800, X1900
Theaterâ„¢ 550 PRO/TV...
|
|
4 |
129 |
|
|
Video Cam Hardware by
deanleeritch
I purchased an Amcap video cam (cheapo) and it worked fine for some time. I
had some issues with some processes and had to restore my system back a few
days. That worked, except the Amcap program does not now work. Then I had
some register problems and purchased Uniblue Registry Booster for a fix. I
believe the fix worked because my DVD player now players; it did not before.
I tried...
|
|
0 |
102 |
|
|
Nvidia 6600 keeps forgetting resolution by
Deano
I have the same graphics card nvidia have updated the vista drivers
hhttp://www.nvidia.com/page/geforce_6600.html
hope this resolves the problem
"agent86oz" wrote:
I set the resolution to match my screen 1280 x 1024 and it works fine. Each
time I reboot the resolution drops to 1280 x 768. I have gone to the nVidea
|
February 8th 07 08:36 AM
by Deano
|
0 |
184 |
|
|
Auto Play not working on my new computer by
death
Hello,
I just got a new computer for christmas: HP pavillion a6220.uk, I am
running vista home premium 32bit which came with it. The problem im
having is that the autoplay feature doesnt seem to be working, I insert
my disc but the autoplay doesn't pop up, I can acsess the files from
doing it manually (going to my computer etc) but I dont really like
having to do this all the time. So if you know...
|
|
2 |
110 |
|
|
Acer Aspire T180-UA381B Upgrade by
Death-Wizh
hey, i am a webdesigner and gamer. I also use my pc for other various high
end purposes. I am looking to upgrade the Processor, RAM(DDR2) & Graphics
card. I am familiar with hardware. What i am confused about is the max that
this computer can take of each. There are too many different responses and
this leads to confusion. I want a dual core, its a AM2 socket. Please supply
with as much...
|
|
1 |
304 |
|
|
startup failure. rather urgent. by
deathofamodernist
So i've recently purchased a compaq notebook pc running vista home
premium. after unwittingly installing what i'm assuming was a windows
update, i am finding myself unable to run in anything other than safe
mode. attempting to normally run the laptop ends up with it jamming on
the windows loading progress bar in startup, attempting a system restore
from safe mode ends in another jammed state. i...
|
|
5 |
280 |