|
|
Trust Graphics tablet by
Seebee
Since enabling my trust graphics tablet (with the correct updated driver) the
mouse works correctly across dual screens but the pen will only travel across
the primary display. My pc seems to go into "tablet pc" mode! Can it be
prevented from doing this to allow me to work across both displays with the
pen?
|
January 10th 08 07:55 PM
by Seebee
|
0 |
98 |
|
|
Trust Optical Mouse MI-2540D by
storm101m
I have just bought a Trust Optical Mouse MI-2540D , however it will not
install properly and fails to find any drivers.
The product is supposed to be USB Vista compatible and should pick up the
generic vista drivers as the company do not supply any specific drivers for
it.
Any help greatly appreciated.
|
|
0 |
175 |
|
|
trust spacecam 360 by
Robert Johnson
Hi anyone had any success installing the Trust spacecam 360 in vista,i can't
seem to be able to find drivers for it,any help wouldbe very much
appreciated
Thank-you In Advance
Robert
|
|
1 |
131 |
|
|
Try Free Project Management Software by
Projectdrive
Try Free
Project Management Software
From
http://www.project-drive.net
Get it now!!!!
For free account go to http://freetrial.project-drive.net/account_pd.jsp
|
|
0 |
532 |
|
|
|
|
0 |
568 |
|
|
Try it by
M.K.
http://www.agloco.com/r/BBCC5087
|
March 2nd 07 09:58 AM
by M.K.
|
0 |
415 |
|
|
Trying to add a new partition by
Sigma
Hi all.
I'm running Vista Home Premium SP1. I'm trying to add a new volume (as I
think they're called) from unallocated space on my hard drive. However, when
I try to do so, it tells me at the end that it's unable to do so as it's hit
the max number of partitions.
It all came preinstalled from Dell, and there are 4 partitions:
No letter - really small, has the tag "EISA configuration"
No...
|
May 5th 08 11:34 AM
by Will
|
2 |
186 |
|
|
Trying to connect PC to TV wth a S-Video Cable by
Erika
I have my computer and tv connected with a S-Video Cable. My computer's
background is displayed on the tv but that is all. I want to play movies
using my computer but have the actual movie playing on the TV screen. I have
"Extend Desktop" selected for monitor 2 (the tv). I have a NVIDIA GeForce
7300 LE video card and Vista Home Premium OS.
Thanks!
|
|
5 |
95 |
|
|
Trying to copy files to WD My Book 500gb: 0x8007045d I/O Error by
Søren Andersen
After first converting my My Book from FAT32 to NTFS, I started copying files
to it, which was fine for about 120gb.
Then, suddenly, I get these I/O errors.
I've tried EVERYTHING. I didn't have System Restore on, so I couldn't remove
it, and put it on again. But, just to be safe, I turned it on, made a
restorepoint, and turned it off again...
I've tried deleting INFCACHE.1 in windows\inf.
( 1 2)
|
|
18 |
205 |
|
|
Trying to figure something out by
RickyBobby
I have messed about and confused my own self. I have two desktop computers
at home that I assembled myself. A few weeks ago both of them went belly
up. It was the power supply on one of them which took some other parts with
it and the mainboard on the other.
So of course I bought a bunch of new parts such as CPU, power supply, couple
of motherboards, and a video card. After using the old...
|
|
3 |
203 |
|
|
Trying to flash the BIOS...for the worse by
PhilTheGap[_2_]
Hi there,
I've tried to flash my BIOS. I've downloaded this
http://drivers.softpedia.com/get/BIOS/Others/ECS-RX480-A-BIOS-11f.shtml for
my Elite RX480-A motherboard. Then the BIOS has been upgraded but the flash
fails because I had to set a jumper beforehand on the motherboard. I've
decided to wait, then after a while I reboot.
Now he PC is running but nothing at all appears on the screen. I'm...
( 1 2)
|
|
11 |
279 |
|
|
Trying to get my new laptop to recognise an external drive. by
help with vista and old drive
My old laptop got trashed so i got a new one. I then went out and got a new
one yesterday, toshiba p200-17c, running centino duo with 2048 ram.
The old laptop would not boot up, and i have salvaged the 60gig hard drive.
I am trying to get my new laptop to recognise the new drive.
I bought an enclosure for the drive and connected it via usb. The drivers
for the old drive were found and loaded...
|
|
3 |
142 |
|
|
|
|
5 |
261 |
|
|
Trying to Partition Vista Hard Drive by
mactovista
Help!
Trying to shrink or partition hard drive on Vista HP to load XP to run
some programs. Computer only 2 mos. old has 500 gig hard drive but will
only allow me 10 gig partition. Message says "Size of available shrink
space can be restricted if snapshots or page files are enabled on the
volume"
Been on chat with hp all morning no help. Tried defragmenting, chkdsk,
etc still limited to 10...
|
|
5 |
468 |
|
|
trying to reinstall the coprocessor by
leanna
i have a laptop hp pavilion dv6000 and somebody had deleted everything at one
time and i got most of it back but im having trouble reinstalling the
coprocessor and if anyone can help please get back to me. thank you very much
--
leanna m martin
|
|
9 |
348 |
|
|
Trying to reuse screen set-up software by
Max100
I recently bought a new computer from Dell w Vista preinstalled. When I first
turned it on it ran some kind of set-up software that enabled me to adjust my
screen (brightness, contrast, etc.) using some short films that showed people
playing pool. Since then I tried to adjust my screen settings and have
managed to totally mess them up. What I would like to do is go back to that...
|
|
5 |
167 |
|
|
Trying to uninstall redundant printer item from Programs and Featu by
Hilary
I started getting printer errors with my laptop, and am about to reinstall
Epson's drivers & other software. I unistalled the printer, made sure it
was removed from Control Panel etc, and removed all the Epson files I could
find (even though that'll mean also reinstalling my seperate scanner, also an
Epson!).
Except for 1 thing, that is. An Epson uninstaller is still showing in
Programs...
|
January 19th 10 07:46 PM
by Hilary
|
6 |
477 |
|
|
Trying to uninstall redundant printer item from Programs and Featu by
Hilary
I started getting printer errors with my laptop, and am about to reinstall
Epson's drivers & other software. I unistalled the printer, made sure it
was removed from Control Panel etc, and removed all the Epson files I could
find (even though that'll mean also reinstalling my seperate scanner, also an
Epson!).
Except for 1 thing, that is. An Epson uninstaller is still showing in
Programs...
|
January 13th 10 07:59 PM
by Hilary
|
0 |
257 |
|
|
|
|
1 |
235 |
|
|
TSSTcorp DVD+-RW TS-L632H ATA drive by
VISTA ce rom failure
My cd rom icon is missing. I cannot use cd rom to reinstall my system. The
current operating system is Vista. Hope anybody can help me.
|
|
2 |
278 |