|
|
print driver successfully installed but still a problem with print by
chiefjay
I own a Dell XPS 410 running 32 bit Vista Ultimate. I have a HP Laserjet 4L
parallel printer that I am trying to connect to the XPS 410. Because the
printer has a parallel cable, it was necessary for me to buy a USB/Parallel
adapter to contact the PC to the printer. I attempted to use the "add a
printer" facility and my system successfully found a driver for the printer.
However, there is...
|
|
3 |
4 |
|
|
printer spooler problems by
Melinda
I can not get the spooler to restart. I receive a erorr code 1068. Is there
any one that can help me I have vista. If so my email is
Please help me
Thatnk you
|
|
3 |
198 |
|
|
Printing preferences by
Dan
I am unable to open the print preferences box either from control
panel/printers or direct from the 'print' dialogue box in vista - it flashes
up briefly before disapperaring!. I see a number of others have listed
similar probs on the web but as yet have found no solution?
|
|
1 |
131 |
|
|
labels on network printer by
Gina
Vista has a network impact printer for labels and prints fine. However, a
network computer running third party software and using the same printer on
the network uses a page worth of labels.
In xp one could create a custom page size and use this definition in a
network printer, and there were no problems.
Is there a solution for vista?
|
|
7 |
214 |
|
|
HP Officejet J5780 installation impossible by
Davide
Running Vista Home Premium x32, it has been impossible to download drivers of
the printer/fax/scanner/copier HP Officejet J5780 both from original disk and
from the site HP. Removed/Disabled any antivirus file.
No driver seems to be trasferable to the machine and the process stops.
Moreover, error 80070103 comes out as soon as I tried to get update HP files
"Hewlett-Packard - Other Hardware...
|
January 15th 08 09:43 PM
by huwyngr
|
3 |
321 |
|
|
Epson stylus DX7000F and Vista? by
valleyofghosts
Recently updated to Vista. My printer had new cartridges installed when i was
running XP but now after installing new printer driver and software from
epson site for my model of printer the ink cartridges show empty. I have
taken them out and put them back in again !! still showing empty! any clues /
help appreciated...thanks
|
January 15th 08 09:43 PM
by huwyngr
|
1 |
181 |
|
|
Printer Driver Problems by
[email protected]
I just got a new Compaq laptop with Vista Home Premium on it. I have
2 printers, a Dell 720 inkjet USB port based, and a PagePro 1350W
Laser which is router based(http address). The drivers for each load,
but no printing. I see by my searching this is a big problem, but I
can't find the answer. I tried the "Net stop spooler" fix, but it
gives me a System 5 error. Any other ideas, or do I dump...
|
January 16th 08 06:47 AM
by SG[_3_]
|
1 |
170 |
|
|
Printing in Photo Gallery by
Steve
Whenever I try to print from Photo Gallery the fax information comes up (
over the selected picture and will not allow me to print the selection.
Please advise how to correct the problem.
Steve
|
January 16th 08 05:39 PM
by Steve
|
0 |
164 |
|
|
office 2007 by
George
Afer installing a dell printer now no MS office program will open. Dell had
me redirect to a network printer which cannot be taken offline. I regret
getting the Vista...
|
|
1 |
193 |
|
|
Printing by
Whayman2005
I have just changed the black cartridge on a Lexmark X83m but print quality
is still bad. I have printed alignemnt pages etc, but no black ink is
showing - YES I have removed the seal!
|
|
0 |
222 |
|
|
Missing home network printer when connecting to Terminal server. by
TS printing
I have a home network. My windows vista setup to print to my Network
printer.
Printer connected directly to the router. I can print locally but when I
connect via remote desktop connection to office terminal server, my home
default printer is missing. Why?
|
|
0 |
181 |
|
|
belkin Print Server & Windows vista by
miguel leon
I print with 2 laptops with windows xp in a belkin print server F1P0001. I
buy a Gateway laptop with windows vista. after install the software (belkin
print server), i donĀ“t print any document with the Gateway.
What is the problem?
Thanks in advance for your reply.
Miguel Leon
|
|
0 |
178 |
|
|
Printing Problem by
Mark Roberts
I have a desktop running Vista Home Premium with no parallel printer ports
only USB. I also have a HP PSC 500 all in one printer with no USB ports. I
have connected both using a USB to Parallel Bi-Directional Cable. Vista
recognises the printer and installs the driver correctly and says it is ready
to use, but when I try to print a test page or document the it comes up on
the printer lcd...
|
January 17th 08 06:30 PM
by jdavlaw
|
9 |
233 |
|
|
spooler problem by
Frank McGlynn
When i print using the spooler everything comes out about ten times the size
it should The letters are about 1 inch high. When i print direct to the
printer all is ok. Photos and print jobs will not print direct to printer so
i cannot print them at all. When i use my other computer I can print normally
under all conditions. Would appreciate some input. Thanks
--
Frank McG
|
|
0 |
197 |
|
|
Printing from Myob V17 by
kevensigns
When I go to print from MYOB V 17 the size of the text on the screen becomes
quite large and the print windows multiply 3 or 4 times. It prints OK but
when you are finished you have to shut down MYOB and restart to keep working.
I have tried it with 2 different printers but same problem. Every other
program I have printed from seems OK.
Thanks
|
January 18th 08 11:56 AM
by Malke
|
1 |
244 |
|
|
problem with shared prinetr under Vista by
Antonio
hello,
i share a printer on a vista computer.
when i print from another computer, the spooler whas updated but the
doccument is never printer and i need to stop the spoler service and delete
all the printing jobs before the server computet can print his own doccuments.
have anyone the same problem?
thanks
|
January 18th 08 01:27 PM
by Antonio
|
0 |
185 |
|
|
|
|
1 |
165 |
|
|
"Standard TCP/IP port" gone missing by
janbon
Hi,
I have two Vista boxes experiencing the same problem. They were both
configured to print using the "standard TCP/IP port" and it worked
beautifully. Now, all of a sudden the printers on both machines appeared
offline, and the "standard TCP/IP port" was missing and could not be added.
It simply is not on the list anymore. I have checked the registry, and
standard tcp/ip is still listed...
|
|
8 |
566 |
|
|
Cannot get HP PSC 500 to work with Vista by
jdavlaw[_2_]
HELP....HELP....HELP......i put a pci card into my brand new gateway, to
accept the 25 pin parallel cable,,,still cannot get Hp psc 500 to
work,,,,,anybody?,,,
--
jdavlaw
|
|
0 |
165 |
|
|
Installing a Printer scanner by
Ripper
I am having trouble installing a Photosmart All in One printer. It keeps
coming up with a Fatal Error saying insufficient priviliges. Please help. I
have spent 4 hours on the phone with Gateway and HP.
|
January 18th 08 09:38 PM
by huwyngr
|
3 |
161 |