After I installed Vista Beta my USB connectivity was gone. I upgraded to the Vista RC1 version hoping that would fix the problem. Nope. There is nothing in the Device Manager about USB. The drivers, however, are on the computer. What can I do to make my computer recognize the USB ports?

This happened first on an upgrade from XP SP2 to RC1, and now on a clean install. None of my USB mass storage devices would appear in Disk Management or Computer. Looking at error messages I was seeing a driver failed to install with a bad parameter. I did a clean install and all of them appear. However, while working with a 120 GB Seagate FDE, I ran that unlock utility which changes the...

Hi, I've a graphic chip K8N800. Is compatible with Aero Glass. Now Aero is disabled, may be of the driver Thank you Max

Hi, Does anyone has experience with the newest IPAQ 6910, Vista RC1 and Ofice 2007 tech refresh. I want to test the combination. Kind regards, Tony Thijs

where is it?

I can't seem to get the Vista x64 drivers from NVIDIA working for my Gigabyte GeForce 7600 GS PCIe video card. Initially Vista installs the WDDM driver, but then disables the device (code 43). After I install the NVIDIA 96.33 drivers for x64, I restart my computer and Windows again disables it. I have a Gigabyte motherboard with the Intel 82945G chipset and the onboard video works, but I'd...

I purchased a Sandisk 2 Gb drive and after it came up and set up ReadyBoost I had a strange extra drive CD Drive (H:) U3 System. I also had my flash drive with 1.91 Gb. I decided this was some lame program Sandisk had shipped with the drive and attempted to format it. Vista would not allow me to format because the drive was in use. I went to XP and the only format option was FAT or FAT32. I...

I'm have noticed that at 1360x1024 resolution the screen in windows vista rc1 x64 keeps flashing often but not always. I've an x1900xt and the latest vista rc1 beta drivers from ati. I thoght it may be an sync problem between vga-driver-monitor. Also I can't select 75hz in this resolution and I know the problem is not the monitor or either the vga because I've also win xp sp2 and I can run...

I'm have noticed that at 1360x1024 resolution the screen in windows vista rc1 x64 keeps flashing often but not always. I've an x1900xt and the latest vista rc1 beta drivers from ati. I thoght it may be an sync problem between vga-driver-monitor. Also I can't select 75hz in this resolution and I know the problem is not the monitor or either the vga because I've also win xp sp2 and I can run...

OK...thought this may help someone. I have a Toshiba P105 with the Conexant High Definition Audio. Upon installing Vista RC1 I got no sound. At first the driver loaded but I got the Code 10 error stating the driver could not start. After deinstalling the device I could not get the driver installed. I searched all the blogs and news boards. I found a lot of people with the same issue and...

Hi, I'm running RC1 64 bit and have just bought an upgrade HD - 80Gb IDE to 320Gb WD SATA 2. I believe I can make the upgrade by transfering data across without having to do a reinstall. How best is this done? or is it easier to reinstall and just move application data files across?

Thanks everyone who contributes to these posts!! you're all great people!!... i have an HP pavilion dv1000t with the same problem(Conexant audio driver error) but thanks to your posts about installing it manually i could solve... or i'd rather say you solve it for me... thanks again and if it's not some kind of abuse of your knowledge... do you know anything about why i can't use my...

Just did a clean install of Vista RC1 and have determined that the Code 43 issue is not with the ATI drivers themselves, but with the motherboard. If you're having issues with the drivers the most likely cause is that your motherboard (at this time) has no support for the WDDM. I am no expert by any means but for me to have an issue now with my graphics card means that my motherboard...

Has anyone got this sound card going yet? Thanks. Pete D

I have installed vista build 5600 on my Asus A6R and all drivers working with the exception of the Irda which is built on to main board, it states Code 32. A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32) Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution...

I have a dell inspiron with a HP DVD 840 e dvd re writter. The Drive reconises fine under windows xp but does not under RC1 5600 of windows vista Does anyone no how to get this drive functioning under vista

I have a USB headset which is appearing as an additional audio device. Vista chose this device as default audio device. But actually I want to use my own audio card as default. When I press to "set as default" button and press ok, nothing changes. I open the same window and USB headset is default again. Windows doesn't want to set my audio device as default. Am I missing something?

(added cross-post to Vista Hardware) "c01by" wrote in message ... I get the same error code with Vista RC-1 for Divio - image - NoteCam Pro USB PC Camera but I have not found a solution yet. "Algypan" wrote: On Windows Vista Beta 2

I've a feeling that Mass Storage Device may refer to SATA drives even though they are listed elsewhere in Device Manager. I also need a Flatbed Scanner driver for a Benq 4300 with Vista 64 bit. Adn I have Unknown Device too - I've not a clue what this might be as evrything seems to be working OK except the scanner. "rogerlebo" wrote: Hi!

Im Having a even getting connected to DNS with my Linksys WRT54G V 5.0 it really seems odd that a Cisco Company would not have drivers yet, I did a live chat last night with one of thier techs and she didn't even seem to know what vista even was. If anyone finds a work around or anything plese let me know Thanks "Andrew Loh" wrote: i think they have to do the drivers at least for recent...