|
|
Mouse is not reacting by
VR6CH
Hi,
I have lately a problem that the mouse that I have (Labtec) is suddenly
stopping to respond. I checked the batteries of course and its not that. The
keyboard (same make) is working without a problem.
The only way of making it work ok is to press CTRL ALT DEL and then the
mouse starts to work in the options menu (Log Off, ....... Task Manager).
After I click on the Task Mgr and it goes...
|
October 9th 06 06:04 PM
by VR6CH
|
0 |
131 |
|
|
Vista restarts itself because of Nvidia + TV Card problem. by
VR6CH
Hi,
I have a problem with 2 hardwares.
First is the Nvidia 5200 card with 128mb.
At some point during the operation, the Vista restarts itself and gives me a
fault in the nvlddmkm file. Also when i am trying to run media player it
starts to say that this module of the graphic card stopped reacting and has
recovered.
I have installed the latest drivers (Vista drivers) for my Nvidia...
|
October 8th 06 08:26 PM
by VR6CH
|
2 |
145 |
|
|
STOP: 0x00000124 happens randomly when I play Sims 2 by
vovillia
I got a new computer about 3 weeks ago, and for the past 2, I get the
STOP: 0x00000124 as few seconds after the computer freezes on me when
I play the Sims 2 game, I notice sometimes right before I suspect the
computer to crash when I play the game is that I hear a tone that one
of my devices would shut off, and all of a sudden the computer goes
really slow and then freezes and half the time, I...
( 1 2)
|
November 15th 09 08:29 PM
by yvert89
|
11 |
362 |
|
|
CD/DVD Rom Issue by
Vorinia
I've tried searching for a similar issue to mine, but can find nothing that
works thus far so I'll post this in hope that someone can help.
My DVD/CD-ROM Drive is a TSSTcorp CDDVDW SH-S203B SCSI CdRom Device (as
listed in Device Manager) and will no longer burn anything.
Due to my lack of experience with Vista, previously I had installed Nero 6
and 7 (at different times) and Roxio MyDVD8 and...
|
November 27th 07 11:13 PM
by Vorinia
|
4 |
114 |
|
|
Drivers for Soundblaster Live! Gamer on Vista (RC1) by
voowe2
Has anyone been able to get the sound to work in Vista Beta (RC1)?
I have installed Vista (RC1), and am very impressed with it. However, I
have no sound. I have visited Creatives web site, and Soundblaster, but they
have indicated on their web site that they will not provide driver support
for Beta Vista before it final release. Strange though, I used to have sound
before (RC1) was...
|
October 4th 06 11:51 AM
by voowe2
|
0 |
161 |
|
|
The strangest thing happened on my way to get sound out of Vista by
voowe2
I hope someone out in the forum can help me understand this:
I can't figure out for the life of me, why after installing the previous
version of Windows Vista Beta 2 that I got sound out it with my current sound
card:
Soundblaster Live! gamer. But now with this new version: Windows Vista
(RC1), I can't get sound out it. Using the same sound card.
I can't believe Microsoft would release a...
|
|
7 |
239 |
|
|
Drivers for Soundblaster Live! Gamer in Vista by
voowe2
Have you been able to get the sound to work in Vista Beta (RC1)?
I too have installed Vista (RC1), and am very impressed with it. However, I
have no sound. I have visited Creatives web site, and Soundblaster, but they
have indicated on their web site that they will not provide driver support
for Beta Vista before it final release. I had sound within the other Vista
Beta I tested, using...
|
October 4th 06 06:58 PM
by Mario
|
1 |
233 |
|
|
drivers for soundblaster live! gamer on Vista (RC1) by
voowe2
Have you been able to get the sound to work in Vista Beta (RC1)?
I too have installed Vista (RC1), and am very impressed with it. However, I
have no sound. I have visited Creatives web site, and Soundblaster, but they
have indicated on their web site that they will not provide driver support
for Beta Vista before it final release. I had sound using the same sound
card with Vista before...
|
October 4th 06 11:53 AM
by voowe2
|
0 |
142 |
|
|
USB devices not present after suspend mode (!?) by
Volkan Senguel
Hi, since the SP1 are installed i have this behaviour that if the PC was in
the suspend (standby) mode and wakes up all usb devices are out off function
(!?)
this hapens not every time, only (i asume) around 5% from the wakup!
the pc its a mediacenter and if no usb devices are available like the
remote control, keyboard or mouse... its not funny
is there a way that vista can...
|
|
0 |
168 |
|
|
Delay power off by
voidcoder
Hi,
I'm currently working on a project with some specific storage which
internally does a lot of write buffering. The whole thing is working
perfect except of a single problem: when shutting down/suspending/hibernating/
rebooting or whatever the power is cut too fast and the storage
(it is USB bus powered) is not able to complete the cached pending writes
thus we are loosing/corrupting data. Is...
( 1 2)
|
|
12 |
298 |
|
|
Bluescreen by
vmatthews41
I keep getting the Bluescreen to pop up randomly.
In the parenthesis there is always the following number 0x00000002.
The fail bucket is 0xD1_CODE_AV_BAD_IP_ANALYSIS_INCONCLUSIVE, type 0.
I have also gotten this one 0xD1_CODE_AV_BAD_IP_yk60x86+145f2, type 0.
|
|
0 |
201 |
|
|
problems with system tray, etc. by
vladman
I am using Windows Vista. In the system tray, the power, network, and
volume icons have suddenly disappeared. They are also greyed out in "Taskbar
and Start Menu Properties." I am the system administrator. Any thoughts on
how this may have happened and what to do?
Thank you!
|
September 11th 07 04:12 AM
by vladman
|
0 |
87 |
|
|
Vista randomly reboots stating a problem with the ethernet adapter by
Vladimir
Hello everyone,
I have a little issue with my system. Sometimes Vista shows bsod, then
reboots and I get a message that it is because of my ethernet adapter.
However, the adapter works fine, the error happens randomly. At least I do
not see a reason why this happens.
My system is up to date, has the newest drivers, I have followed the
possible solutions for the problem that Vista has...
|
|
2 |
217 |
|
|
USB device installation problem (yet another one) by
vlad
So I have a MobileMate SD+ card reader that refuses to be recognized on vista
ultimate 64...
I tried changing the driver path in registry
I tried forcing it to look for a driver in c:\windows
I even tried deleting the infcache
All to no avail...
( 1 2)
|
July 7th 07 12:02 PM
by freddy
|
13 |
149 |
|
|
Display driver problems by
vlad
I get this error message just after Windows Vista starts:
Display Driver stopped responding and has recovered
Display Driver R300 stopped responding and has successfully recovered
However, my computer hangs and resets over and over again such that I have
to reset my whole pc. Thinking that this is a video card problem, I have
updated my ATI x700 driver but the problem persists. Now, I have...
( 1 2)
|
|
16 |
174 |
|
|
On Screen Keyboard by
vjgillette
How do I get rid of the on Screen keyboard? It opens every time I log-on to
my laptop.
|
June 27th 08 06:40 PM
by Brink
|
1 |
189 |
|
|
Floppy Drive won't work by
Vi_xon
Just got a Dell XPS 410 running Vista. My floppy drive will not work. The
system sees it in the bios, sees it during boot, and will let me access it in
safe mode. Device manager says everything is fine, but when I try to access
it from Vista I get the following error:
A:\ is not accessible.
The rquest could not be performed because of an I/O device error.
I just spent 3 hours with Dell tech...
|
|
2 |
253 |
|
|
GeForce 8800GTS (G92) Nvidia Drivers problem? by
vizzer
I recently got a GeForce 8800GTS 512Mb and have been getting a wide
variety of BSOD 1033 and BCCode:24,50,d,d1,10etc. I think it has thrown
every code at me possible. Any one know what could be the problem? All
these problems started after I installed the Graphics card and before
that everything was smooth as eggs.
My system is a
Vista x64 sp1 OS
Gigabyte 965P-S3 rev1 Motherboard
4x1 G.skill...
|
June 18th 08 05:55 AM
by vizzer
|
5 |
218 |
|
|
|
|
4 |
135 |
|
|
Replace motherboard by
Viv
Following my attempt to flash the BIOS on my MSI K9N4 SLI-F board I now have
an unusable computer so I presume I destroyed the BIOS as all I get is a
black screen.
I ordered a replacement but was sent a K9N SLI board by mistake. My
supplier is, unusually, slow in responding to my request to put the matter
right so I am wondering if I could just install the new board, and what
problems I...
|
April 19th 07 04:10 AM
by pvdg42
|
2 |
147 |