|
|
PVR150 not found after upgrade to Vista home premium by
Erik
I had MCE 2005 installed, and everything worked fine, including my Hauppauge
pvr150. Since I upgraded to Vista Home Premium (Dutch), Vista doesn't see my
pvr150. (Not a clean, fresh install, but pure upgrade)
If I force to install my card by choosing hardware - add older, I see the
blue screen of death and I have to reboot in safe mode and disable the PVR.
Than I can boot again in normal...
|
February 27th 07 06:08 AM
by Erik
|
6 |
438 |
|
|
sigmatel 9758 support needed to make audio work under Vista by
sigmatel driver needed
getting the run around trying to get Vista driver support. Tried Signatel,
they said try laptop manufacture, they said try signatel, looked all over
web, and this MS site. The laptop is a Gateway 675xl-prr with the signatel
9758 codec. When I ran advisor it indicated it would load fine and work.
Tried the old drivers several times and other xp versions and every
suggestion on web sites. ...
|
|
5 |
507 |
|
|
plug n play devices by
William
I am having alot of trouble with my new wireless microsoft mouse and ten
key...both are supposedly "plug n play" devices. But neither work. Vista asks
me to install drivers on plug n play...HELP!!!!
I have gone to the manufacturers site and downloaded both drivers and
nothing works. I wish I had stayed with XP. All this trouble is not worth it.
|
|
3 |
480 |
|
|
190 IRQ's??? by
Rob
I have been researching my ACPI errors...you know like this one:
Log Name: System
Source: ACPI
Description:
IRQARB: ACPI BIOS does not contain an IRQ for the device in PCI slot 13,
function 0. Please contact your system vendor for technical assistance.
And in looking into my IRQ's and sharing I fould that Vista created 190
|
February 27th 07 11:57 AM
by Bob
|
3 |
523 |
|
|
previously working USB devices now showing as "Unknown Device" by
A L
Hello-
All of a sudden a few days ago, many of my USB devices started showing as
Unknown Devices in the Device Manager. I've read that this sometimes happens
in WinXP too- but no post that I found about the problem proposed a solution
(for Vista or XP.) If I disable the "Standard Enhanced PC to USB Host
Controller", the system then locates drivers for all of the devices, but runs
them in...
|
February 27th 07 01:18 PM
by A L
|
5 |
529 |
|
|
Vista & 3Com by
robbio
Hi at all,
My Vista installationa has a problem with my network card.
Brief description: i have XP prof, i downloaded the windows vista advisor
utility to check my pc hardware, it said it's ok, good. After in another
hard disk I installed Vista, after installation I had not able to connect to
internet. Vista said me (device manger or similar )that the only device it
didn't able to recognize...
|
February 27th 07 01:18 PM
by Alan
|
8 |
523 |
|
|
Hard drive recognition by
Bull 40
I just built a new computer with a Gigabyte GA-M59SLI-S5 motherboard, AMD
Athlon 64 X 2 dual core processor, 2 GB's DDR@ RAM, two western digital 160
GB hard drives, a Nvidia GeForce 88oo GTX graphics card and Windows 64 bit
Ultimate O/S. The hard drives are connected to the JSATAll0 and JSATAll1
ports on the mother board. When I boot the system I see the system recognizes
the two hard...
|
February 27th 07 01:27 PM
by Anna
|
2 |
489 |
|
|
Severe issues with Asus P5WD2-E motherboard by
HA
Hi,
I have been trying desperately to install Vista Ultimate 32 on my Asus
P5WD2-E Premium mobo currently running WinXP Pro.
I got two hard drives configured as a RAID1 on the Intel ICH7R controller.
The RAID drive is divided into two partitions with one of them holding the
OS. I did the installation as a custom install and used a driver floppy with
the latest Intel RAID drivers...
|
February 27th 07 01:42 PM
by HA
|
0 |
426 |
|
|
Vista doesn't recognize Travel Drive by
JamesL
I have a Memorex U3 Travel Drive. Vista sees the drive in My Computer . However I cannot
access the drive. Took it out and tried it in old XP machine---fine. I
contacted Memorex and they said they didn't have updated drivers and my never
have them for this device. Any ideas?????
|
February 27th 07 04:13 PM
by JamesL
|
5 |
494 |
|
|
Missing DVD-RAM by
froggy
I have a DVR LG GSA 4163/B DVD RAM and Vista Ultimate. Under XP the device
works correct. Under Vista it is not found. The firmware is already updated
to the last version (4163an16). Can anyone help me?
|
February 27th 07 06:22 PM
by froggy
|
0 |
469 |
|
|
Boot up by
steven
Now that I have Vista loaded and working on my PC I have a boot up problem.
When I boot up I get a screen that is asking me to choose a previous windows
operating system or windows Vista. I never want to choose anything but
windows vista and it slows down my boot up process.
How do I remove this option? It wasn't an option before Vista!
|
|
1 |
325 |
|
|
Unable to enter standby/sleep mode with x64 Vista by
PsyberX
Well I have tried looking for a solution on the net but so far drawing a
blank. Perhaps someone has figured this out and can help me?
I reciently installed VISTA Ultimate x64 (clean). Everything is working
fine, except when I attempt to send the computer into sleep mode (S3). The
computer thinks for about 5 seconds, begins to power down, and just as it is
about to sleep, the fans and neon,...
|
|
1 |
264 |
|
|
Canon i865 Printer by
Will
Ok, Vista installs its drivers and it works but I cant get the CD Label
Print to work. Actually it wouldn't let the auto run work so I installed
Label Print by exploring the CD and finding the exe program. Now the problem
is that this program comes up with a message that it needs a compatible
printer to work........it doesn't recognise the Vista drivers I would
assume. Now this is the only...
|
|
1 |
274 |
|
|
|
|
6 |
279 |
|
|
|
|
14 |
424 |
|
|
MSI K9AGM-FID : Any luck with Vista? Spontaneous reboot. by
The CyberKnight
Has anybody been able to install Vista on the MSI K9AGM motherboard?
Everything works fine for hours under Windows XP MCE 2005. Meanwhile, under
Windows Vista Home Premium, the machine resets spontaneously every 10 minutes
flat (very precisely).
I've been investigating the issue for 2 days now without any luck. Even Safe
Mode does not survive the 10 minutes delay.
Any additional input would...
|
February 28th 07 04:22 AM
by Bfrank
|
6 |
325 |
|
|
USB drives work, but hang on Properties using Explorer by
Calipete
All of my various USB drives and devices work fine, but if I go to
Explorer/Properties
for a flash drive, Explorer hangs. So I can't get get to Readyboost. Also
Autoplay dialog does not appear when I plug in a flash drive and if I go to
Control Panel/Autoplay there is no option for such drives. "Use AutoPlay for
all media and devices" is checked.
Please help, thanks.
|
|
0 |
248 |
|
|
Brother Printer MCW 820 by
neil2jo
I have the above model printer with Vista HE, although I don't think this is
the problem (it is a vista prob).
I can connect the printer via wireless no problems and works except the
scanner feature. However if I turn off the printer and try again tomorrow
(turn it back on) the printer, whilst being recognised is showing not
available (or similar). In order to get it to print again, I have...
|
February 28th 07 06:36 AM
by neil2jo
|
2 |
273 |
|
|
dvd writer no longer recognised as writer by
Willem
Initially my dvd writer on my Acer Aspire notebook works fine,
but when I active media center on Vista it is no longer recongised as a
writer.
It shows an error "no burner attached'.
In de device manager it shows as a CD-Rom and reports errors with the driver
but when I try to update the driver it reports I already have the latest
version.
I had to go back to factory reset to get it working...
|
|
3 |
273 |
|
|
MS fingerprint driver causes error in Vista by
Michael
I use the MS fingerprint reader on a Windows Vista 32 bit system and have
installed the latest digitalpersona 2.0 driver from MS hardware site. When
closing the internet explorer browser windows I get an error message:
"Internet explorer has stopped working a must now close" it then searches for
a solution and restarts internet explorer. It is an annoyance rather than a
serious flaw because...
( 1 2)
|
February 28th 07 07:14 AM
by MikioK
|
10 |
490 |