|
|
Product Key. by
waynoworlater
I also had a key for Beta 2 and the New Office Programs but deleted my email
instead of putting it in my 'keepsakes' folder, if anyone has a key with
extra activations, etc...help me out? THANKS ahead of time...if y'all
actually believe me, no one has so far..*sucks*
( 1 2)
|
September 3rd 06 03:42 AM
by SAM-R
|
10 |
897 |
|
|
VISTA INSTALL FROM MSDN DVD FAILS WITH 80070241 error by
Al
The saga continues.
1. Down loaded the August CPT release from MSDN.
2. Ran the hash checks on it using EF Commander. (A nifty tool, but its bug
the user to buy now technique is unspeakably rude.)
3. Tried upgrading running setup within Vista. No matter what I did i got
can't continue file is corrupted or missing etc. The error number was
80070247. Same as with the July MSDN issued cd-rom. (I...
|
September 2nd 06 10:50 PM
by Al
|
0 |
518 |
|
|
setup.exe - application error by
Toonker
The exception unknown software exception (0xe0000100) occurred in the
application at location 0x77e44268. I have nothing attached to this system
not required for operating system install, so I am at a loss to what this
means. Any suggestions will be appreciated.
|
September 2nd 06 09:46 PM
by Toonker
|
0 |
581 |
|
|
Intel sata raid driver will not install by
don259
I have the abit ic7max3 motherboard. When I try to install the intel sata
raid driver for the board i get a blue screen when trying to install windows
vista rc1. The driver install fine on windows vista beta 2. This is really
driving me crazy.
Don't know where I can get a new or updated driver. Any help and or
solutions would be greatly appreciated. Thanks
|
|
3 |
527 |
|
|
|
September 2nd 06 07:23 PM
by HPM
|
5 |
619 |
|
|
A8R32-MVP Deluxe and SLI by
Gary R.
Chris - I can't get IN to Vista to install any drivers! I get to the Vista
splash screen (just before the GUI would normally appear) and it reboots. It
does the same thing in Safe Mode and also with only one of the two Crossfire
cards installed..
"ChrisC" wrote:
Hi Gary, just to ppint out that you have a crossfire board, not a SLI one...
Which uli drivers are you using as the work just...
|
September 2nd 06 06:58 PM
by Gary R.
|
0 |
473 |
|
|
Vista install failure by
kenkun
I tried to install Vista 5536 and 5552, and everything were fine until last
step "Completing installion." It suddenly showed blue screen about 1 or 2
sec, then keep rebooting.
I already tried couple times, it just repeat same thing all the time.
Please help me.
Cpu: intel core 2 E6300
Motherboard: Gigabyte GA-965P-DS3
Video Card: Nvidia 7900GT
Ram: 1G
HDD: Seagate 500G SATA
|
September 2nd 06 06:55 PM
by kenkun
|
0 |
555 |
|
|
A8R32-MVP and SLI won't work? by
Gary R.
Sorry about the misuse of the term "SLI", I know it's a Crossfire board.. SO
is there a way to disable CROSSFIRE in BIOS? It's moot at this point because
I just removed my secondary card completely and Vista STILL causes a reboot
just after the Vista splash screen (just before the GUI would normally
appear)...
Thanks
"Tompa" wrote:
This mobo does not support SLI. It's a Crossfire mobo. ;)
|
September 2nd 06 06:55 PM
by Gary R.
|
0 |
516 |
|
|
nvidia raid for pre-RC1 by
Dave
OK hears the thing, I have a MSI motherboard, with two 80gig sata drives
setup with raid0,
I have one 80gig IDE for backup, there is 2 partitions on the raid0 drive,
one for XP the other has vista beta 2 on it, I downloaded pre-RC1 and burned
it, worked the first time,
But when I tried to install it, replacing beta2 (clean install) the nforce4
raid drivers for vista beta2 do not work, for...
|
September 2nd 06 05:21 PM
by Dave
|
3 |
599 |
|
|
|
|
1 |
555 |
|
|
VirtualPC to Virtualize Vista on Vista by
William McIlroy
First, VirtualPC warns that Vista is a bad operating system upon which to run
VirtualPC. That's not entirely true. VirtualPC works pretty okay on Vista
except for some "issues" revolving around the new software that drives what
shows up on the display(s) in front of you. These can be worked around.
Second, Vista's installation procedure is maddeningly obtuse in that it gets
to a point...
|
|
0 |
533 |
|
|
pre rc1 upgrade from xp home by
B Barley
I just did an upgade from xp home last on my laptop last night and wanted to
post my results.
#1 DO NOT DO AN UPGRADE
There are several reasons.
a. if you have a good deal of software installed, the upgrade could take a
while. It took almost 4 hours for me to do an upgrade, as compared to just
over an hour for a clean install.
|
|
2 |
639 |
|
|
pre-rc1 install stoppage by
Charles T
I was invited to download pre-rc1. I downloaded it and burned it.
Install stops at first reboot. Tried on 2 machines. Checked md5 sum and
seems to be wrong on another thread.
Now I can't redownload it.
Any help.
--
Charles T. Simonson
|
|
1 |
599 |
|
|
reinstall wmdSync.exe by
Gerhard
How do I reinstall wmdSync.exe?
It got lost during the uninstallation of active sync4.2 (which I found out
too late is not needed in vista). Now I get the message wmdSync.exefailed
because RAPI.dll is missing.
TIA Gerhard
|
September 2nd 06 04:38 AM
by Gerhard
|
1 |
722 |
|
|
bad setup file by
hudsonliberty
I final got a dvd burner and I now I'm getting a bad setup file. Help me.
|
|
0 |
597 |
|
|
Vista Install needs DVD drive driver?! by
Eran
I had the same problem and i managed to solve it, the solution:
1. run the setup in windows xp, at the same piont you will be able to see
the missing driver listed on the bottom(next to "load drivers").
2. get the latest driver you can find, save it on the HD and browse for it
during the setup.
I was missing a driver for my intel board`s RAID
btw: the setup wont accept the driver during a...
|
September 1st 06 11:41 PM
by Eran
|
0 |
1,575 |
|
|
Build 5536 crcdisk.sys error on Toshiba Tectra A4 by
David Weemys
Just downloaded and installed build 5536 in the hope a problem with
Beta2 would have been resolved, but evidently not!
First boot halts and safe mode shows it stopping at 'crcdisk'sys'.
Does anyone have any workarounds/solutions please?
Salamat
|
|
4 |
759 |
|
|
Vista Install BSOD - Nvidia nForce 4 Board by
techgeek3
Hardware specs:
nForce 4 board
Winxp on 2 SATA 80Gb drives in Raid stripe(160Gb), C:\
2 40Gb PATA drives running individually, D:\ and G:\
Situation:
attempting to install Vista (Beta 2, build 5348) to PATA drive D:\
select setup to install Vista to D:\
Files copy and computer reboots
|
September 1st 06 10:03 PM
by Peter M
|
1 |
552 |
|
|
Blue Screen on Boot by
Commander Gamma
After and install of vista, no problems, booted up after the installition
fine, then after a restart, blue screen right after the vista boot screen.
And the same everytime i boot. I can get into safe mode. Please Help Me
--
-{(Gamma)}-
|
|
0 |
556 |
|
|
Problem with start vista after instaling a patch by
[email protected]
hey i god an error message after i have instal windows vista patch(beta2)
i had mye coputer som days on the internet and have upgrade vista beta 2
after i disconekt the copmuter from the internet and but it on a other rom he
instalt more patch(update) the i have restart vista and i got an error
massage that a file was not found and vista cant be stardet ... ist look like
tha a grafik drive...
|
|
0 |
523 |