Hello Now all the facts are in... Your Bios is ACPI Vers. 1 Cap. and you need a update BIOS to ACPI VERS. 2 or Better for vista to work "MPfreeUK" wrote: I also have a Toshiba Satellite A30 Series (SA30-714). BIOS Rev: 1.80

WEll After some research I found out it's in the hands of toshiba to update the BIOS to ACPI Vers.2 or higher for Vista to work. "MS-Pcbob" wrote: I have attempted to load Vista on a Tosh A30 (I think it is) P4 2.8 512RAM 40GB HDD

Does Vista have drivers compatible for this scanner?

We use USB audio channel to send some data down/up (occasionally a word wrong is OK). This works for 2000 and XP. But for Vista, the data down to device is changed too much. Things do not work at all. Does Vista Audio Driver enforce to add a filter? If so, can I turn it off? Thanks!

Will Vista require the drive be formatted ad ntfs? Thanks, James

I'm having a problem with this tuner. Channels 60 get progressively worse the higher up I go to the point where channel 67 is completely unwatchable. All other channels appear perfectly. I first used the drivers installed by Vista, the upgraded to the beta drivers on the Hauppauge website, then tried the drivers that Jason...

I'm having a problem with this tuner. Channels 60 get progressively worse the higher up I go to the point where channel 67 is completely unwatchable. All other channels appear perfectly. I first used the drivers installed by Vista, the upgraded to the beta drivers on the Hauppauge website, then tried the drivers that Jason...

I am in desperate need of help here. I have an Intel D945GTPLKR as shown he http://www.intel.com/design/motherbd/tp/tp_available.htm I need to get the TPM recognized so I can perform testing in Vista that I have to have done by the end of next week. None of the drivers I have been able to find for the chip (an ST Microelectronics module) will run in Vista. Also, there does not seem to...

Does anyone know which DVD decoder will work with Media Player 11? Sonic doesn't, i've just tried it. Does anyone know of any others that are problem free?

I tried to install Vista on a new computer: ABIT AW9D, 4Gb RAM Intel Core 2 Duo E666, on board SATA DISK raid and new NEC-DVD burner AD-5170 IDE. After several tries with the Vista-64 DVD hanging and asking for DVD-drivers . Then I installed Win XP-64 on the computer with success from the DVD-drive. Then I installed Vista from the Iso with WinRar. Everything but the DVD is working. I can...

Are there?

wait a tic... the previous answer is only true if you want to use the Media Center. Then this card will not be supported as mentionned. However, ATI should have drivers and an updated MMC - eventually. Have you tried the XP drivers? "JW" wrote:

Is anyone using the Matrox DualHead2Go product with Windows Vista for Dual Monitors (Dual Head)? I'm considering this product but I haven't seen any Vista drivers yet.

Hi All, I've seen similar threads, but no solution. In my case, the reason is known: the Canopus Edius installer tried to patch the CDROM drivers with its own stuff, and - even though Vista said the new driver is incompatible and rejected it - the original driver got damaged. Now, the question is how to restore it without fresh Vista install?

i just bought a Zune today and put the CD in my comp (running Vista RC2 32-bit) and found out that Zune doesnt support my operating system... is there a fix for this or will I just have to use my Zune on my XP laptop?

After installing Vista Ultimate RTM (from TechNet), upon first logon, Windows almost instantly downloads some drivers from Windows Update for my onboard Realtek AC97 audio (which had no drivers installed after setup). Windows then prompts for a reboot after installation. When I log back in, I do have sound, but the control panel extension, or "SOUNDMAN.EXE" just don't work at all. They don't...

Hi, I'm having problems with my sound. I'm running Windows Vista RC1 Build 5600 on a Fujitsu Simens AMILO Pro V2085. I guess the problem is the driver for the internal audio but I can't find anything that works!?

Hi all, I installed RC2 on my notebook with nvidia geforce 7300. After that bluescreen appears as soon as i run media stuffs. So I have to turn off the hardware acceleration. dxdiag told me that the ndivia driver is not signed by microsoft. "The file nv4_disp is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL). You may be able...

Hi, I have a home network and one of the computers has a scanner attached. I can't find a way to access this scanner from my other computers. Is there a way to 'see' and use this scanner from the other computers, especially my system admin machine? I am using XP with full updates. Thanks in advance,