I have a USB/Firewire hard drive (with 3 buttons, I never use for starting backups) The devise works fine when I connect it by USB, but I get a drvier error when I connect it via Firewire. I would exspect it is the buttons that are causing the MS driver not to work. Any suggestions on how to fix this?

I'm attempting to install Vista RC1 cleanly to my computer. I have 3 SATA drives in my NForce4-based PC. 1 SATA Drive is standalone, while the other 2 are in a RAID 1 array using the onboard NVRAID controller. I am unable to see ANY drives, even after loading either the XP, Beta 2 or RC1 Nvidia drivers for the RAID controller in question. Has anyone else had this issue? Thanks!

Anybody knows about any WSD-based printers or storage devices? Or otherwise PnP-X enabled.......

I have been unable to find the drivers for my SATA drive on my Asus mother board. I have a single 160Gig SATA drive and the controller disk from Asus will not allow me to install the driver. I searched the Asus site and no joy. Anyone with any ideas? It seemed that the Beta versions seem to work fine and I did an upgrade but still no luck. Everything seems to be working as I get a 5.4 on my...

There seems to be an incompatibility when trying to use an HP DC7600CMT with any nVidia PCI express card. The one I am attempting to use is the ASUS N6600GT. The HP DC7600CMT has an onboard intel graphics chip that DOES work fine. However, when trying to use the nVidia card I receive this error in device manager: This device cannot find enough free resources that it can use. (Code 12) It...

HI, I own a computer with the folowing components and i've big problems with windows Vista RC1 and beta2: ASrock 775XFire-eSATA2 with Intel 945PL chipset Gigabyte GV-NX66L128DP PCI Express vga with GeForce 6600LE Chip/128MB Intel Pentium D 930 1024MB RAM The computer reports a resource conflict between PCI Express root port and

I own a computer with the folowing components and i've big problems with windows Vista RC1 and beta2: ASrock 775XFire-eSATA2 with Intel 945PL chipset Gigabyte GV-NX66L128DP PCI Express vga with GeForce 6600LE Chip/128MB Intel Pentium D 930 1024MB RAM The computer reports a resource conflict between PCI Express root port and the vga card. So I can only use the vga in safe mode. I've tried both...

I own a computer with the folowing components and i've big problems with windows Vista RC1 and beta2: ASrock 775XFire-eSATA2 with Intel 945PL chipset Gigabyte GV-NX66L128DP PCI Express vga with GeForce 6600LE Chip/128MB Intel Pentium D 930 1024MB RAM The computer reports a resource conflict between PCI Express root port and the vga card. So I can only use the vga in safe mode. I've tried both...

I have attached a WD external drive via a FireWire connection. Device Manager says FireWire port is good. The drivers seem to install correctly. But the drive does not appear in MyComputer. Vista does not recognize any USB ports for me to connect the WD external drive that way. Any thoughts?

I have a sitecom wl-141 wireles network adapter, but i can't get it to work. After installing the driver I got a error message that says something like: A problem encountered with installing, can't load the driver. I know sitecom doesn't support Vista, but how can i get my wireless adapter to work with vista?

Does HDA X-plosion 7.1. soundcard work with Vista 5600? Best regards, Jesper

Is Intel(R) 82915G/GV/910GL Express Chipset Family compatible with Aero

Hi everyone! I'm having trouble with RC1 (5600) of Vista. I'm running the OS on a Dell Inspiron 9300 (Pentium M 1,73 Ghz, 2 GB RAM, Nvidia Geforce 6800 Go 256 MB). After the installation process everything works fine - the graphics, the WLAN. When I connect to my home WLAN the first time, Vista updates automatically with new drivers for the Intel 2200B/G-WLAN-Hardware and the Sigmatel...

I installed Windows Vista Beta 2 when it came out, and it worked very very well with my Radeon Xpress 200 in my Compaq computer (Aero and everything). Then, when I updated Vista to RC1, whenever I boot Vista, I get a blue screen. I then tried a clean install, and same thing happened. Before, with Beta 2, I used the Radeon Xpress 200 driver, and disabled (e.g. didn't use) my PCI card, a Radeon...

I need one too... USB for me. The CLP-550 driver will make the printer heat up and cycle, but it won't actually PRINT anything. This is a Vista-killer for me if I can't get a driver. The CLP-500 may not be s usper-expensive printer, but it was enough that I'm not willing to abandon it. Besides -- I like the built-in duplexer. A 32 bit Vista driver would do...

Does anyone know if there is a comparison chart for 32 bit verses 64 bit hardware for Vista? Or do I have to look at each one separately? Also, is there a list of vendors that are supporting 64 bit Vista? I am in sort of a bind because I work in the field of computer forensics and presently Vista 32 bit does not support or some of the functions do not work for some of my forensics tools...

I stupidly installed Alcohol 120 percent in Vista and now every time Windows loads, it automatically tries to install the incompatible driver and gives me BSOD. I can't get into the registry to stop the installation process quickly enough after my desktop comes up. Is there anything I can do to stop this installation routine? Safe mode doesn't help here, either. System restore was turned...

Below is a list of the items that "currently" function perfectly with Vista Beta 2 on my laptop that are / will not work if I "upgrade" to Vista RC1........There is even a Microsoft product that wont work as well in the list..... a.. eTrust EZ Antivirus 7.1 b.. Intel PROSet/Wireless c.. Nero ImageDrive d.. Nero Vision 4 e.. QuickTime 6

Hello, I desparetly need a vista 64 bit driver for my canon 8400F. I can not find it, and are afraid: "using vista = no scanner". Does any one have a driver?

Hi I am have the same problem missing 1 Gb of memory When I was running vista beta 2 32bit O/S, I could see all 4GB of memory, upgrade to RC1 Build 5600 I am now only seeing 3GB of memory. If I switch to vista RC1 64bit, I can see 4GB RAM on my system. No problem with my Bios, all set as suggested the problems is in this new