|
|
Internet connection problem in windows vista RC1 by
Sam Z Best!
hi
i have a 3com etherlink server 10/100 PCI(3c980B-tX) , LAN card trough
whichi connect my windows xp to the internet..
In windows rc1 the lan card is detected but is not installed due to some
driver issue.. but i cannot connect to the internet because of that and also
not register my self for windows vista...
and beacuse of that no drivers are available tome
|
|
0 |
266 |
|
|
multiple hard drives by
J6
Using RC1.....I have 5 hard drives on my system...using multi-boot Xp and
Vista....vista only see's 3 of the harddrives.....xp see's all 5 of the hard
drives....can anybody think of a reason why I can't get vista to see all 5 of
the hard drives also? Thank's youse much.
--
J6
|
September 30th 06 04:15 AM
by Morbius
|
1 |
263 |
|
|
Problem with CDRW/DVD Player by
Morbius
After installing both build versions, one of my DVD drives does not recognize
any type of CD, it appears correctly installed at the Device Manager, but
when put a CD or DVD on it, is like there were on the bay.
The hardware with the problem is a LG model HL-DT-ST RW/DVD GCC-4320B
When try to reinstall the drivers, it says that it have the best drivers
available.
The other DVD works fine.
|
September 30th 06 04:07 AM
by Morbius
|
0 |
260 |
|
|
4 LCD's and 2 Video cards by
Dan
Same problem with RC1 (2 supported video cards don't work, only the primary
card as set in the BIOS works). I've seen a lot of complaints about this and
no solutions. I don't know that Vista supports multi video cards at
present... Thought RC meant feature complete?!?!
"markesdale" wrote:
Does Vista Beta 2 support dual monitors yet?
I cannot get two video cards running at the same...
|
September 30th 06 02:42 AM
by Dan
|
0 |
278 |
|
|
Samsung ML-1510 driver solution by
Nellie
Anyone using a Samsung ML-1510 may have found that it is not supported by
Vista Beta 2. Having contacted Samsung they couldn't give a toss about it..
however I found that installing the ML-1450 driver resolved the problem and
now I can happily print whilst using Vista now.
Hope this helps anyone with this issue.
--
All mail checked via Trend Micro PC-cillin Internet Security 14 (Build...
|
September 30th 06 01:59 AM
by MikeP
|
1 |
489 |
|
|
AOL/BT ADSL Modem and AOL 9.0 errors! by
plumbjet
Hi All
Is it poss to use a bt router for a bt broadband connection would this get
round the usb modem problem, I would like to know if this would work as iam
about to install vista for the first time. Or is they a make or model router
that will do the job.
"Leon Jollans" wrote:
I have the AOL 9/BT Voyager combo. I have found two ways to get the modem
|
|
1 |
334 |
|
|
a new monitor SyncMaster Samsung 205 BW - 20" and DVI by
JerzyMarian
Today I have bought a new monitor. Fantascic. But now I discovered a problem
with switching users. There are two acounts on may machine. When I turn on
machine ewerything start ok. I can see two acouts to log. I chose one and is
ok. But when I chose "switch user" (to run the next acount) the screen of
monitor change to black and after 10 s. the computer starts reseting. It was
with DVI...
|
|
3 |
269 |
|
|
ATK0110 ACPI driver solved! by
Brad
I hate to appear dumb, but could you provide a link as I cannot find this on
the ASUS website.
--
Brad
"Carlos" wrote:
Bernardo:
You will find that folder in the installation files and not in the
|
September 29th 06 11:11 PM
by Brad
|
0 |
260 |
|
|
Windows Update resolved my NIC driver issue by
vulpes
Can anyone offer a solution my 3Com #c905b won't work with RC 1 when it tries
to install the driver i receive an error the data is invalid, i have tried 3
different NIC's none will work. anyone got ideas?
"Pete" wrote:
Hello to all,
Here´s a tip for everyone that can´t seem to find drivers for your network
card that works with Windows Vista:
|
September 29th 06 09:45 PM
by vulpes
|
0 |
264 |
|
|
Audio on HP dv8000 laptop under Vista x64 by
Ryan
I've got the sound card working on my HP laptop with a Conexant AC-Link
adapter now... what I ended up having to do was install the ATI Integrated
Digital Audio 64 bit beta driver, and then reboot and turn off the "enforce
driver signing" option during boot to complete the install.
This may help the other people who are having trouble with Vista x64 and the
sound on their HP or Compaq...
|
September 29th 06 09:43 PM
by Ryan
|
2 |
268 |
|
|
Display Setting Task by
mc
hello there, I need some help pls,
I don't know what's going on with the Display Setting task, it pops up
everytimes I log into windows Vista.
Any comments would be welcome. thanks very much mates
|
September 29th 06 05:36 PM
by mc
|
0 |
365 |
|
|
ATI Radeon 7000 VE on Dell PowerEdge 1800 by
Robert Robinson
The ATI Radeon 7000 VE on-board graphics adapter is correctly recognized
by Windows Server 2003, but not by Vista #5536. The Vista beta 2
software from ATI also fails to recognize the 7000 adapter. Does anyone
know of a Vista driver for the 7000 ?
Thank you.
Robert Robinson
|
|
6 |
599 |
|
|
ATI 9600 Resolution problem by
Mailman
Hey all,
I posted this earlier, but I lost it in the shuffle...
I'm having a resolution problem since making the step to RC1. I can only
display 1024x780 as opposed to the 1280x1024 I was getting prior to the
upgrade. I use a pretty generic 17-inch monitor that had no issues displaying
the 1280 res before.
I tried using ATI's Vista RC1 divers they released, but that didn't help,
and after...
|
|
2 |
318 |
|
|
Need NIC Driver by
Jeremy Ginsberg
I installed Vista into a VPC (MS VPC 2004) but the network card will not
work. I installed the add-on pack and still does not work. It shows up as a
"Intel 21140-Based PCI Fast Enternet Adapter (Emulated)". I am running a
Intel PRO/1000 PL Network Card.
Any help is appreciated.
( 1 2)
|
|
10 |
470 |
|
|
CODE 10 with Dual Realtek PCI-E GbLAN controllers 8111B and 8110S by
Cthelight
I got a new MSI K9A Platinum with 2 Realtek PCI-E GbLAN controller 8111B and
8110S, the hardware works fine in linux but vista (32bit build 54??) it says
it can not start the hardware (code 10)! whats going wrong! i got only 10
days befor actvation!
|
|
0 |
292 |
|
|
Sound Blaster Live by
Rob
Has anyone heared whether there is or will be any drivers available for the
Sound Blaster Live card on the Vista RC1 Build 5600 64bit OS
Thanks
Rob
|
September 29th 06 11:36 AM
by Carlos
|
2 |
281 |
|
|
ATI X1600 Pro Problem by
SUAT
Hello.
I have exactly the same card as yours, namely, Ati x1600 Pro 512 MB AGP 8x
from Sapphire. I could not make Ati Catalyst drivers work, but MS drivers
that come with RC1 release work properly with Aero enabled.
Please be advised.
Regards
|
September 29th 06 09:58 AM
by SUAT
|
0 |
231 |
|
|
Vista Video Card Suggestions... by
E. Lindquist
I have an NVIDIA Quadro NVS Display card and would like to upgrade to a
"Vista" compatable card. My system rating is at a um, 1.0 low lol. Everything
else in my system is up to par, Dual 2.66 XEON's, 3 gigs of ram and a fast
15,000 rpm SCSI drive, but my graphics just "stink" in the performace range.
I would like to certainly be able to use the full versitility of the AERO
graphics. I can't...
|
|
3 |
276 |
|
|
ATI Mobility Radeon 9200 - HP Compaq NX7000 by
Gerard
I'm having a big problem with the vista built-in driver for ATI Mobility
Radeon 9200 on a HP Notebook.
With the notebook panoramic-flat it doesn't work (it seems screen refresh
it's not ok), but it works good with an external screen.
The only solution is using Standard-VGA driver or ATI-MRadeon9200 Windows XP
driver, which reduces drastically performance.
Any idea?
|
September 29th 06 06:49 AM
by Gerard
|
0 |
277 |
|
|
Rotate / Portrait / Pivot Display Success, Anyone? by
Transcriptionist
Request:
Does anyone have portrait mode running on a NON-tablet PC? If so, what is
your graphics adapter and drivers?
- - - - - - - - - - - - - - - - - - - - - - -
Background:
My work as a transcriptionist is done best in portrait mode.
|
|
0 |
277 |